Skid-mounted H2 generator
One of the most energy efficient electrolyzers on the market with a cell stack power consumption at 4,3 kWh/Nm3 of hydrogen gas produced, and outputs up to 2000Nm³/h per electrolyzer, pressurized at 20-30 bar.
This is one of the best-selling solutions, fully modularized and can be based on a 10 MW module design. The electrolyzer adopts a bipolar pressure filter structure. The seal gasket researched and developed by PERIC ensures no leakage from the electrolyzer whether in hot or cold conditions. The gas-lye treater is skid-mounted with simple process flow, allowing easy installation, operation and maintenance.
The H2 generator is automatically controlled through PLC programming, with high reliability and remote control. Operator-friendly HMI makes the operation safe and convenient. Initial H2 purity>99.8%; Initial O2 purity >99.2%.
We can tailor delivery to any customer requirement, from complete installation of the entire electrolyzer plant, to delivery of specific modules according to the customer’s preferences including but not limited to:
- H2 purification
- Demineralization
- Remote monitoring and control
- Cooling
- Oxygen production
- Compression
- Hydrogen refueling station
Specification
More models are available on request.
| Electrolyzer | CDQ-200 | CDQ-1000 | CDQ-2000 |
|---|---|---|---|
| Hydrogen production rate (Nm3/hour | kg/hour) per electrolyzer | 200 | 18.0 | 1000 | 90.00 | 2000 | 180.0 |
| Hydrogen pressure (bar) | 30 | 20 | 20 |
| Hydrogen purity (%), with optional purification | >99.999 | >99.999 | >99.999 |
| Hydrogen dew point (°C) | -70 | -70 | -70 |
| Oxygen purity (%) | >98,5 | >98,5 | >98,5 |
| Production Capacity Dynamic Range | 10-100 % of flow range | 10-100 % of flow range | 10-100 % of flow range |
| Power consumption (kW/Nm3) | ≤4.3 | ≤4.3 | ≤4.3 |
| Stack at 100% load: | |||
| Power consumption (kW/Nm3) | 4.30 | 4.30 | 4.30 |
| Efficiency HHV (%) at full stack load | 82 | 82 | 82 |
| Total system at 100% load with auxiliary | |||
| Power consumption (kW/Nm3) | 5.00 | 5.00 | 5.00 |
| Efficiency HHV (%) | 68.00 | 68.00 | 68.00 |
| Electrical interface | 3 phase 400 VAC +/- 10 %, 50-60 Hz. 10kv 230VAC, 1 phase |
3 phase 400 VAC +/- 10 %, 50-60 Hz. 10kv 230VAC, 1 phase |
3 phase 400 VAC +/- 10 %, 50-60 Hz. 10kv 230VAC, 1 phase |
| Water intake (liters/Nm3) | 0.9 | 0.9 | 0.9 |
| Water quality (µS/cm) | <10 | <10 | <10 |
| Communication interface | Ethernet/Can-bus | Ethernet/Can-bus | Ethernet/Can-bus |
| Control software | Siemens/AB/Modicon | Siemens/AB/Modicon | Siemens/AB/Modicon |
| Installation | Indoor/container | Indoors | Indoors |
| Ambient temperature skid frame (°C) | +5–+40 | +5–+40 | +5–+40 |
| Skid frame measurements | 12 200 x 2438 x 3200 mm | 450 m2 | 550 m2 |
| Skid frame weight (kg) | <1 960 | <8300 | <12 600 |
| Expected stack service life (years) | +15 | +15 | +15 |